Guide

Can You Customize YETI Soft Coolers?

Updated on · By the Coolers Junkie team

Yes, you can customize a YETI soft cooler, but only through accessories and add-on gear. The bag itself comes in fixed colors and sizes, so the real customization is choosing the model, adding HitchPoint accessories, and pairing it with YETI ICE.

On this page (7 sections)
  1. What does YETI actually let you customize on a soft cooler?
  2. Which YETI soft cooler sizes can you choose from?
  3. How does the HitchPoint Grid let you customize the bag?
  4. Can you change the color or add a logo?
  5. Does a YETI ICE pack count as customization?
  6. What YETI soft cooler upgrades aren't possible?
  7. How should you plan a YETI soft cooler setup?

Yes, you can customize YETI soft coolers, but only with accessories and add-on gear. The bag itself comes in fixed colors and sizes, so when people ask can you customize yeti soft coolers, the honest answer is that the real choices are model, colorway, and YETI's clip-on extras.

Nothing about a Hopper Flip is built to be altered after purchase. What you can do is build a setup around the bag: choose the size that fits your trips, pick a colorway you like, and use the HitchPoint Grid and YETI ICE to tune how it carries and how long it holds cold.

What does YETI actually let you customize on a soft cooler?

YETI lets you choose the model and colorway, and it gives you attachment points for accessories. It does not offer a custom print, patch, or monogram service for its soft coolers.

So the customization is front-loaded. You decide between a Hopper Flip 12 or 18, pick from the colors YETI sells, and then dress the bag with gear that clips to the outside.

The shell, zipper, and insulation are fixed at the factory.

That's a narrower kind of customization than you'd get on a hard cooler or a phone case. It's closer to kitting out a backpack than designing a product from scratch.

For most buyers that's enough, because the bag already does the hard part: keeping ice frozen.

Which YETI soft cooler sizes can you choose from?

The two Hopper Flip sizes here are the 12-can and 16-can versions. Picking between them is the first and most useful customization decision you'll make.

The Hopper Flip 12 holds up to 12 cans plus ice. It measures 12 5/8 in long by 10 in wide by 11 1/2 in high and weighs 3.1 lbs empty.

That's a personal cooler for lunch and drinks for two.

The Hopper Flip 18 holds up to 16 cans plus ice. It measures 15 2/3 in long by 10 1/5 in wide by 12 3/5 in high and weighs 5.1 lbs empty.

It also adds a detachable shoulder strap and reinforced handles.

The size you pick sets everything else. A 12 fits under a truck seat or on the passenger floor; the 18 takes longer trips and bigger loads.

If you're weighing whether the bigger bag is worth the extra weight, our look at are yeti soft coolers worth it covers the value question.

Hopper Flip 12: best for solo day trips

The Hopper Flip 12 suits one person heading out for a morning or afternoon. Its 12-can capacity covers a lunch and a few drinks with room left for ice.

ColdCell Insulation, YETI's closed-cell foam, is the core of the bag. YETI says it holds cold better than ordinary soft coolers.

The HydroLok Zipper is 100% leakproof, and the DryHide Shell is waterproof and resistant to punctures and abrasions.

That combination makes the 12 a good fit for a tree stand, a duck boat, or an afternoon on the water. It's small enough to carry in one hand and tough enough that you don't have to baby it.

Hopper Flip 18: best for two people and longer days

The Hopper Flip 18 suits two people or a full day out. Its 16-can capacity means more food and drink before you need to restock.

The bag carries the same ColdCell Insulation, HydroLok Zipper, and DryHide Shell as the 12. The difference is scale plus the detachable shoulder strap and reinforced handles, which make a heavier load easier to move.

The 18 also includes the HitchPoint Grid, YETI's set of attachment points on the outside. That grid is where most of your real customization happens.

If a bigger bag still feels like too much to carry, a soft cooler with wheels is the practical alternative.

How does the HitchPoint Grid let you customize the bag?

The HitchPoint Grid is YETI's built-in attachment system on the outside of the Hopper Flip. It's the closest thing to factory customization, because it lets you clip gear on without touching the shell.

YETI sells accessories designed to connect to the grid, including a bottle opener and a sidekick pouch for small items. You can also hang a carabiner or a dry bag from the loops.

Each addition changes how the bag works for your trip without changing the bag itself.

Think of the grid as the mount. You choose what goes on it based on what you carry.

A fishing trip might want a line cutter within reach; a picnic might want a bottle opener on the outside.

This is also where the safety limit sits. Clipping gear to the grid is safe because the points are reinforced.

Sewing patches onto the DryHide Shell or the zipper tape is not, since a puncture or a stitch line through the waterproof layer can open a leak.

The color is fixed when you buy, so choose your colorway up front. YETI sells the Hopper Flip 12 in Charcoal and the Hopper Flip 18 in Ultramarine Violet among its options.

What you see at checkout is what the shell stays.

Adding a company logo or a personal monogram isn't something YETI offers on soft coolers. The shell is a waterproof, puncture-resistant fabric, and the zipper is a leakproof design.

Embroidery or a heat-pressed patch can compromise both.

If a logo matters for a business or a group trip, order the colorway you want and skip the branding. A dry bag or a hang tag clipped to the HitchPoint Grid gets you a label without touching the bag.

Does a YETI ICE pack count as customization?

Yes, in a practical sense. The YETI ICE is a refreezable, reusable pack that works as an ice substitute or as an addition to your ice stash.

Matching the right size to your cooler is a real performance upgrade.

YETI offers multiple sizes of the ICE block, so you can outfit everything from a Hopper Flip 12 to a Tundra 350. The 2 lb block measures 8 in long by 5 3/8 in wide by 1 5/8 in high.

Its custom shape reduces freezing time, and the design is break-resistant to handle the tumbles a soft cooler takes.

Here's the rule: use the ICE as your only cold source for short trips, and add it alongside cubed ice for long days. A block that fits the floor of the bag leaves more room above for food.

Bigger blocks last longer but eat capacity.

What YETI soft cooler upgrades aren't possible?

You can't change the insulation, swap the zipper, or resize the bag. Those parts are sealed into the shell at the factory, and that's what makes the cooler leakproof and durable.

The Hopper Flip line is sold as a finished bag. ColdCell Insulation, the HydroLok Zipper, and the DryHide Shell are fixed construction, not modules you upgrade later.

Cutting into the bag to add a drain or a divider would destroy its watertight design.

What that means in practice: buy the size and color you want, then customize with what clips on and what goes inside. If your plans change later, the answer is usually a second bag rather than a modified one.

Soft coolers from other brands take a similar approach. Our Igloo vs YETI comparison shows where the two differ on capacity and price tiers, and coolers like YETI covers alternatives if the fixed setup doesn't fit your needs.

How should you plan a YETI soft cooler setup?

Start with the size, then the color, then the accessories. That order keeps you from buying gear that doesn't fit the bag you end up with.

Pick the 12 for solo day trips and lunch for two. Pick the 18 for full days and bigger loads.

Add a YETI ICE block in the matching size, and use the HitchPoint Grid for the small gear you want within reach.

Skip patches, embroidery, and repainting. The waterproof shell and leakproof zipper are the reasons the bag works, and permanent changes put both at risk.

The customizable part of a YETI soft cooler is everything around it, not the bag itself.

If you're still deciding whether to buy in, weigh the fixed build against the accessory options. The short answer to can you customize yeti soft coolers is yes, within limits: choose the model and colorway carefully, then let the HitchPoint Grid and YETI ICE do the rest.

Frequently asked questions

Can you put patches or embroidery on a YETI soft cooler?

YETI sells its soft coolers as finished bags without a custom patch or embroidery program. The DryHide Shell is a waterproof, puncture-resistant fabric, so adding your own stitching or glue risks a leak or a damaged surface.

Skip permanent changes if you want the bag to keep its leakproof zipper and shell intact.

Do the YETI Hopper Flip models have attachment points for extras?

Yes, the Hopper Flip bags include YETI's HitchPoint Grid, a set of reinforced attachment points on the outside. You can clip a shoulder strap, bottle opener, or other YETI sidekick gear to the grid.

The HitchPoint Grid is the main built-in customization feature on these soft coolers.

Can you change the color of a YETI soft cooler after you buy it?

No, the shell color is fixed at the factory and can't be swapped later. YETI offers each model in a set of colorways, so the color choice happens when you buy.

Pick the colorway you want up front, since repainting or dyeing the waterproof shell would likely ruin it.